R&D Magazine: 100 Award Winners - Energy Technology: Air Conditioning by Evaporation


R&D Magazine: 100 Award Winners - Energy Technology: Air Conditioning by Evaporation

In the Press - Sep. 29, 2012

NREL DEVAP Conditioner, product development

Evaporative coolers, which use water as a refrigerant, are one of the few viable energy-saving technology alternatives to air conditioning. But they only function when the air is dry, and tend to deliver humid air.

A new technology from the National Renewable Energy Laboratory (NREL), Boulder, Colo., AIL Research, Princeton, N.J., and Synapse Product Development LLC, Seattle, Wash., has the potential to bring evaporative cooling to a wider audience. DEVAP: Desiccant-Enhanced Evaporative Air-Conditioning operates on the same principle, but is indirect: Incoming air is in thermal contact with a moistened surface that evaporates the moisture into a separate air stream. As the evaporation cools the moistened surface, it draws heat from the incoming air without adding humidity to it.

The system uses a desiccant to absorb water vapor. Because this is an exothermic process, it releases heat that can warm both the desiccant and the incoming air. However, DEVAP's liquid desiccant is also in contact with a plastic sheet that provides thermal contact between the desiccant and a stream of water, which is wicked into a flocked surface that is bonded to the plastic sheet. As outdoor air flows past, water evaporates, cooling this surface. The cooler water also draws heat from the desiccant, keeping it cool and maintaining its effectiveness. The two stages of DEVAP allows it to operate effectively in a wide range of climates without consuming high levels of water.

Air-conditioning system

National Renewable Energy Laboratory
AIL Research
Synapse Product Development LLC

Development Team

Synapse Product Development, AIL Research, National Renewable Energry Labratory(l-r): Eric Kozubal, Ron Judkoff, and Jason Woods from NREL.

The DEVAP: Desiccant-Enhanced Evaporative Air-Conditioning Development Team
Eric Kozubal, Principal Developer, NREL
Jay Burch, National Renewable Energy Laboratory
Dylan Garrett, Synapse Product Development LLC
Ian Graves, Synapse Product Development LLC
Ron Judkoff, National Renewable Energy Laboratory
Andy Lowenstein, AIL Research
Steven Slayzak, formerly with National Renewable Energy Laboratory
Redwood Stephens, Synapse Product Development LLC
Jason Woods, National Renewable Energy Laboratory

R&D Magazine


Upcoming Events

Other News

Cambridge Consultants Developed Life-Saving Ventilator at Lightning Speed

Today, our colleagues at Cambridge Consultants unveiled Veloci-Vent, a sophisticated emergency ventilator designed and built at the request of the UK Government for use in the treatment of COVID-19.

Synapse Joins Sustainability in Manufacturing Virtual Summit

Martine Stillman, VP of Engineering, joined a panel of experts from the Manufacturing, 3D Printing, and Product Development industries to discuss using 'Environmentally Friendly

FORME Life Launches Fitness Home Studio

Our client, FORME Life, has launched the most immersive and engaging experience in home fitness to date.